Removing your historic wallpaper, as you might already know, is a boring, messy, and time-consuming task, especially once you don’t hire the correct techniques. Moreover, you ought to additionally know how to strip the wallpaper effortlessly with out causing any harm to your walls. However, if you comply with the correct steps, you could total this activity in a extra efficient manner. Therefore, we’ve compiled this step by step aid on how to eliminate wallpaper that you should execute the assignment seamlessly and get your house prepared for a fresh wall masking or a brand new coat of paint. Study on!
There are several methods to take down old, tired wallpapers. But the ideal technique totally depends upon the kind of wallpaper and how it become previously installed.
Step-by-Step Process on How to Remove Wallpaper:
Step 1: Prep Up Your Area
- Thoroughly scan your walls. Remove all barriers that could impede your work. For example, there might be decorative items, wall hangings, pictures, electrical face plates, or phone jacks. Remove all fixtures that comes on the way. Conceal electric shops and switches with plastic and tapes.
- Take a plastic drop fabric and lay it at the floor, whilst taping the sides over the baseboards so as to make a watertight seal. Positioned towels over the plastic sheet so that they take in any water runoff from the walls.
Step 2: Assess Your Wallpaper
- Waterproof and foil-type wallpapers are generally constant by means of strong adhesives. Those could be effortlessly pulled faraway from the skin by way of honestly stripping them off with your hands.
- In order to verify the type of wallpaper, start with one of the edges (toward the bottom) and test to peel it away using a putty knife or simply your hands. If it comes off effortlessly devoid of inflicting any damage to the underlying drywall, you may preserve the method till the entire wallpaper is removed. If the paper is stubborn, use a razor knife. Make parallel cuts (not too deep), with gaps of round 10 inches each. Then pry away the wallpaper along with your fingers. Any ultimate scraps could be scraped away later with assistance from hot water solution.
- However, if this isn’t the case, you would possibly need to go both for the solvent or steam method.
Step 3: Employ the Solvent Method
- For this process, you wish to buy a liquid stripper concentrate. Verify the label, study the instructions, and mix it with warm water.
- Next, get a wallpaper-perforating tool and make tiny holes around the surface. These instruments come with rollers and small spikes and make sure that the solution penetrates the wallpaper, thereby, enabling the whole solvent to soak in and dissolve the glue. Be careful now not to press too hard; else you may damage the drywall’s paper surface.
- Take a sponge or paint brush, dip it within the solution, and practice the liquid throughout the wallpaper — starting with the bottom and masking one small area at a time. Leave it for a minimum of 30 minutes.
- After 1/2 an hour, verify the paper through attempting to scrape it away along with your fingers. If it is loose, you could begin the next step. Sometimes, you may see that the wallpaper has started to sag and is already pulling off from the surface.
- In the end, start to remove the paper with the aid of a scraper or putty knife. You’ll need to repeat the stairs for the more stubborn areas.
Note: The vast majority of advertisement solvents accessible available in the market are caustic. For that reason wear gloves and eye apparatus to protect your self from the harmful chemicals.
Step 4: Apply the Steam Method
Well, you may adopt this system simply whilst the above two techniques fail. It’s a prolonged technique and requires you to steam and strip simultaneously. You may want to employ this approach only if you have stiff, heavy, and old-style wallpapers, which have been on your partitions for quite some time.
- Rent an electric steamer and get a wallpaper-perforating tool. Make tiny holes similar to we described for the solvent method. Once it’s done, retain the steamer pad over the surface, covering one section at a time. Hold it long enough so that the steam penetrates the paper and loosens the glue. Now, don’t keep it for too long. Otherwise, the drywall below also will get damaged.
- Once you notice the wallpaper softening, begin eliminating it with a scraper or putty knife, commencing with the seams or edges of the perforations. Be careful now not to strike too tough or you’ll come to be tearing off the drywall below. In no way use your arms since the superheated steam and wallpaper adhesive blend can burn your fingers.
- You could need to repeat the method for the extra obdurate locations until the entire layer of wallpaper comes off.
Note: Steamers additionally launch hot steam and first rate hot water. Therefore, always wear gloves and eye protection.
Step 5: Clean the Walls
Make an answer with a small portion of tri-sodium phosphate (TSP) and water. Take a sponge and rub the whole wall, eliminating all ultimate strains of glue. As soon as the partitions are clean, wipe down the wall with a damp towel or sponge.
There! We are hoping to have responded your query — how to get rid of wallpaper. As soon as all of your tough work is over, you’ve a clean wall, ready for a new coat of paint. You can also select a fabulous wallpaper, as consistent with your preference, and renovate the space with a creative, gorgeous design.
Read more: Interesting Wallpaper Ideas To Consider