A Step by Step Look at How to Change a Kitchen Faucet

It’s no shock that a lot of us turn out to be calling for professional help for plumbing jobs. We’ve all noticeable those comedy skits where the man of the home tries to repair a leaky kitchen sink and finally ends up flooding the house. However, taking into account hourly plumber charges would range anywhere between $45 and $150, learning how to handle smaller plumbing problems ourselves doesn’t seem like such a bad idea. To start with, here’s a step by step look at how to change a kitchen faucet.

The average cost to install a new faucet is among $300 to $1150. It also might take you up to 4 hours to complete the job. Here’s the right way to pass about it.

What You Need to Buy

plumbing tools
Photo by Freepik

The very first thing you’ll have to do is examine your existing faucet hooked up and see what parts you may want to replace. Here’s a record of stuff you may want to buy.

  1. Check lower than your kitchen sink and purchase the correct form of faucet depending at the number of holes there are. There ought to be among one and four. Remember that a four-hole faucet cannot be installed in a one-hole sink. You could, however, use an escutcheon plate to install a one hole faucet in a four-hole sink.
  2. Also, you may need new shut off valves if the historical ones aren’t completely functional or are worn out.
  3. You may need to buy new provide tubes. Purchase stainless steel-sleeved provide tubes for longer durability. They’re also designed to avoid kinking while being installed around obstacles.
  4. Check your tool kit and see in case you have the right tools. You’ll want an adjustable basin wrench, slip joint pliers, a tubing cutter, and a set of open-ended wrenches. If you don’t have these, cross out and purchase them. 

There may always be other things you may want to buy, so we’d imply you plan to paintings in the course of store business hours, simply in case you would like to run back for supplies.

Removing Your Historical Faucet

kitchen faucet
Image by Michal Jarmoluk from Pixabay CC0

The first thing to do whilst replacing a kitchen faucet is to get rid of the historic faucet. Let’s walk you throughout the process.

  1. Turn off the water valves lower than your sink to shut off the water provide to your lines. Then, relieve the pressure in the water strains by turning on the faucet. In case you have a disposal related to the sink, turn off the power to it and disconnect it.
  2. Disconnect the water provide lines. Before you do so, we’d suggest you take a photograph of the plumbing configuration so you understand how to attach it back. Use a bucket to contain any spillage.
  3. You will need an extra pair of hands for the subsequent step. Get someone to hold the faucet in place while you use a basin wrench to get rid of the washers and nuts protecting the faucet in place. In case your faucet has plastic nuts, you may be able to disconnect it utilizing your hands. If they’re very tight, use a pair of pliers to loosen them earlier than taking them off using your hands. 
  4. Remove the retaining bracket and the sprayer.
  5. Unhook the availability lines, and you’ve effectively removed your historic faucet!

Installing Your New Faucet

kitchen faucet replacement
Image by fran1 from Pixabay CC0

Now that you’ve removed your historical faucet, here’s how to install the new faucet. Such a lot manufacturers awarded detailed directions for installing a new kitchen faucet.  

  1. Install the rubber or plastic gasket over your kitchen sink’s faucet holes before setting the deck plate. Some manufacturers may need you to use plumber’s putty or caulk to install the gasket, so read the instructions.
  2. Depending on the kind of faucet you’re installing, feed your faucet lines into the designated holes.
  3. Install your nuts and washers underneath the sink. Now might also be the best time to clean any extra caulk from installing the gasket.
  4. If you’re installing a pull-down faucet, the supply pipe now ought to be attached to the quick-connect hose. As soon as that is done, attach the load on the hose. Remember to ensure there’s enough clearance for the load to hang freely. Fix the training strains of the faucet in the course of the other holes.
  5. Secure the faucet utilizing the mounting awarded by the manufacturer. Tighten it in place using a screwdriver.
  6. Next, attach the water supply lines. An adjustable wrench is used to tighten the nuts. Be careful while tightening the nuts of the provision lines. Use plumber’s tape to secure the traces if necessary.
  7. Check if you’ve linked everything safely by turning at the water slowly. If there’s a leak, flip off the water and tighten the connections again.
  8. Turn at the faucet and permit the water run for a whilst to clear the traces after removing the aerator from the faucet. 
  9. Once again, determine for any leaks and make adjustments if necessary. If there aren’t any leaks, replace the aerator. You’re performed with installing a new kitchen faucet.

Get Started on Your DIY Adventures

We’re sure you’ve figured out that replacing your faucet isn’t really rocket science, provided you have the proper of guidance. Retain coming back right here and we’ll introduce you to new hacks ranging from DIY plumbing to DIY carpentry to each other aspect of home renovations that you may be able to handle devoid of professional help.

But just in case you do want to hire a professional to assist you, we’ve acquired you protected there as well.

A Step by Step Look at How to Change a Kitchen Faucet was last modified: December 7th, 2020 by Narayan Shrouthy